Torches-Industrial – www.torches-industrial.com

UK 4AA Worklight

Brightest, Smallest, most versatile 4AA cell light.

This fully accessorised worklight can be mounted on a Fire Helmet, PSU Helmet, Hard Hat carried in a belt pouch or fitted to a pocket clip. A necessity for confined space workers, utilities, municipalities, fire fighters, safety inspectors, police, etc...

Features

Power : 2.1 watts
Lamp : High brightness Xenon filled
Burn Time : 4-5 hours
Battery : 4 Alkaline
Size : 5.6 x 1.5 x 1.2 inch
Weight : 6oz (inc. batteries)
Materials : ABS, polycarbonate, PP Rubber

Waterproof to 10 Feet

Benefits

Rubber sheath moulded over bezel to reduce glare and improve impact resistance
Prefocused high intensity spot beam
Polarised battery contacts, hydrogen scrubber catalyst, and O o-psi vent minimize damage from leaking batteries

CE (Ex) – intrinsically safe for use in hazardous locations

NOTE: The 4AA Xenon torch can be upgraded to eLED by changing the lamp unit and bezel.

Instruction notes for 4AA – 4AA ES2 Instructions (PDF)

UK 4AA eLED® Zoom

The UK4AA electronic LED (eLED®) has all the features that make it a tremendous work light.

The 2-watt LED lasts for thousands of hours and maintains constant brightness for over 80% of the battery life. Unlike conventional lights the solid state LED will not break when dropped. As a result, you save real money on the cost of battery and lamp replacements. A twist of the bezel zooms the light between an intense narrow beam and a broad illuminating beam using the unique Projection Optics design. By clicking the switch rapidly one can switch between full power to the LED and less power for extending the burn time. This fully accessorised worklight can be mounted on a hard hat or fire helmet or carried in your pocket or tool box. A necessity for confined space workers, utilities, municipalities, fire fighters, safety inspectors, etc.

Projection Optics let you zoom with a twist of the bezel from a wide beam to an intense spot
Single high-intensity 2-watt LED lasts for thousands of hours and will not break when dropped.
Unique eLED® circuitry maintains constant brightness for 80% of alkaline battery life
Rubber sheath moulded over bezel to reduce glare and improve impact resistance (passes 6 ft drop to concrete test)
Push-button thumb switch switches light between ON/OFF and high/low intensity with continuous or momentary action
New easy loading drop-in battery compartment for quick reload of batteries
Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries
Tough, electrically non-conductive, non-corroding ABS and polycarbonate plastic construction.
Mounts on all work helmets with accessory mounting clips
Waterproof to 10 feet
CE (Ex) – intrinsically safe for use in hazardous locations

Battery : 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5 V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.

NOTE : Light is not certified for use with Lithium batteries in hazardous locations. Use only listed Alkaline cells.

4AA eLED® Zoom Rechargeable

The 4AA eLED® Zoom model fitted with a rechargeable NiMH battery pack and a high brightness white LED.

This rechargeable UK4AA eLED® Zoom work light is powered by high capacity nickel metal hydride cells which charge in 1.5 hours utilizing a drop-in fast-charge stand. A high intensity 2.1-watt LED runs for 5 hours on a charge. The waterproof light is actuated by a snap action thumb switch and the ABS/polycarbonate case is non-conductive and will not corrode. A wide array of accessories includes helmet mounts for all hard hats, nylon belt holster and auto charge adapters. The UK4AA can be mounted on a hard hat or fire helmet and carried in a belt pouch. A necessity for confined space workers, utilities, municipalities, fire fighters, safety inspectors, etc.

Fast 1.5 hour two stage charger for quick charge and trickle maintenance charge
Rubber sheath moulded over bezel to reduce glare and improve impact resistance
Push-button thumb switch
Variable medium to narrow beam
Tough, non-corroding ABS and polycarbonate plastic construction
Temperature range: -4° to 122°F (batteries), 32° to 122°F (switch), -4° to 95°F (storage)
Waterproof to 10 feet